SFP-H10GB-CU2-5M: Cisco 10GBASE-CU SFP+ Passive Twinax DAC Cable, 2.5m
MPN: SFP-H10GB-CU2-5M|By: Cisco
Starting from
$130
Indicative. Final pricing is confirmed with your quote.
In Stockships worldwide
- Condition:
- New (authorized channel)
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Authorized & warrantied
Sourced through authorized distribution, with the full manufacturer warranty.
Compatibility checked
Validated against your server platform before dispatch.
Delivery & lead time
Confirmed with your quote, including expedited freight where available.
Business & public sector
POs, net terms and volume pricing for qualified organizations, government and edu.
Product overview
Cisco lists SFP-H10GB-CU2-5M as a 10GBASE-CU SFP+ passive twinax DAC cable, 2.5m. Direct-attach copper is cheaper and lower latency than optics but is limited by length and by what each switch will accept. Tell us the two endpoints and we will say which of the two is right for the run.
Quotes are itemised down to the accessories, so nothing that is needed to make the part work is left off and discovered later.
Specifications
General
- Manufacturer part number
- SFP-H10GB-CU2-5M
- Product Type
- Transceivers & Cables
- Manufacturer
- Cisco
Technical specifications
- Cable Length
- 2.5m
Interfaces & connectivity
- Optical Standard
- 10GBASE-CU
- Cable Type
- Passive
The table below is what the transceiver is documented as, not what we have inferred from the part number. If the figure you need is missing, ask and we will source it from the manufacturer.
Where the Cisco SFP-H10GB-CU2-5M is deployed
- Sourcing SFP-H10GB-CU2-5M against a build sheet that names it explicitly
- Replacing an optic that has started erroring
- Cabling a new rack into an installed fabric
Who this part is for
- Network teams matching optics at both ends of an existing link
- Integrators supplying the passive layer with a switch order
- Procurement buying optics in quantity for a scheduled build
What you get ordering this from us
Ordered by part number
SFP-H10GB-CU2-5M is what is quoted and SFP-H10GB-CU2-5M is what ships; where an alternate code is genuinely the same part we name it rather than swap it silently.
Answered by a human
A quote comes back with the reasoning attached, including the cases where we think you should buy something else.
Compatibility checked
We confirm the part is supported on your platform before it ships, rather than leaving the check to you.
Questions buyers ask about this part
Is SFP-H10GB-CU2-5M genuine and is the warranty intact?
Yes. Supplied new and unopened, so the manufacturer warranty and firmware update path stay supported. No grey-market stock and no refurbished units sold as new.
Will SFP-H10GB-CU2-5M work in my server?
Tell us the switch at both ends of the link. Optics are frequently vendor-coded, so a module that is electrically correct can still refuse to come up; we confirm the coding for both ends before it ships.
Do you accept purchase orders and quote at volume?
Yes. Purchase orders are accepted from qualified organisations, net terms are available on approval, and tiered pricing applies at quantity. Tell us how many you need.
Compare other Transceivers & Cables we stock
| Model | Brand | Key spec | Availability | From |
|---|---|---|---|---|
| 10G SFP+ SR 850nm 300m Optical Transceiver Module | NVIDIA Networking | Speed: 10Gb/s | In Stock | $40 |
| Arista 1G SFP SX 850nm Optical Transceiver Module | Arista | Speed: 1Gb/s | In Stock | $50 |
| Juniper 1G SFP SX 850nm Optical Transceiver Module | Juniper | Speed: 1Gb/s | In Stock | $50 |
| HPE 1G SFP SX 850nm Optical Transceiver Module | HPE | Speed: 1Gb/s | In Stock | $50 |
| Dell Technologies 1G SFP SX 850nm Optical Transceiver Module | Dell Technologies | Speed: 1Gb/s | In Stock | $50 |
| Intel 1G SFP SX 850nm Optical Transceiver Module | Intel | Speed: 1Gb/s | In Stock | $45 |
Browse all Transceivers & Cables or everything we stock from Cisco.
Specifying a system, not just the part?
Optics and cabling are part of the fabric spec on a cluster build, since both ends and the switch have to agree.