QDD-400G-LR4-S: Cisco 400GBASE-LR4 QSFP-DD Transceiver Module (SMF, 1310nm, 10km, Duplex LC)
MPN: QDD-400G-LR4-S|By: Cisco
Starting from
$3,180
Indicative. Final pricing is confirmed with your quote.
In Stockships worldwide
- Condition:
- New (authorized channel)
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Authorized & warrantied
Sourced through authorized distribution, with the full manufacturer warranty.
Compatibility checked
Validated against your server platform before dispatch.
Delivery & lead time
Confirmed with your quote, including expedited freight where available.
Business & public sector
POs, net terms and volume pricing for qualified organizations, government and edu.
Product overview
Part number QDD-400G-LR4-S identifies this Cisco 400GBASE-LR4 QSFP-DD Transceiver Module (SMF, 1310nm, 10km, duplex LC). Optics have to match at both ends and are frequently vendor-coded, so a module that is electrically correct can still refuse to link. This is 400GBASE-LR4. Tell us both switch models and we will confirm compatibility before it ships.
Priced per unit, with tiered pricing at quantity. Send the number you need and we will come back with the banded price.
Specifications
General
- Manufacturer part number
- QDD-400G-LR4-S
- Product Type
- Transceivers & Cables
- Manufacturer
- Cisco
Technical specifications
- Transceiver Type
- LR4
Interfaces & connectivity
- Connector
- LC
- Optical Standard
- 400GBASE-LR4
The table below is what the transceiver is documented as, not what we have inferred from the part number. If the figure you need is missing, ask and we will source it from the manufacturer.
Where the Cisco QDD-400G-LR4-S is deployed
- Swapping out a failed transceiver for QDD-400G-LR4-S under change control
- Holding spare optics against a link-level SLA
- Replacing an optic that has started erroring
Who this part is for
- Network teams matching optics at both ends of an existing link
- Data centre teams cabling a new rack to an installed fabric
- MSPs holding spare optics against a customer SLA
What you get ordering this from us
Ordered by part number
The order is placed against QDD-400G-LR4-S, not against a description of it, so there is no room for a substitution you did not agree to.
Compatibility checked
We confirm the part is supported on your platform before it ships, rather than leaving the check to you.
Volume pricing
The listed price is per unit; tiered pricing applies at quantity and purchase orders are accepted.
Questions buyers ask about this part
Is QDD-400G-LR4-S genuine and is the warranty intact?
Yes. Supplied new and unopened, so the manufacturer warranty and firmware update path stay supported. No grey-market stock and no refurbished units sold as new.
Will QDD-400G-LR4-S work in my server?
Tell us the switch at both ends of the link. Optics are frequently vendor-coded, so a module that is electrically correct can still refuse to come up; we confirm the coding for both ends before it ships.
Do you accept purchase orders and quote at volume?
Yes, POs from qualified organisations, net terms on approval, and banded pricing once the quantity is worth banding. Send the number and we will price it properly.
Compare other Transceivers & Cables we stock
| Model | Brand | Key spec | Availability | From |
|---|---|---|---|---|
| 10G SFP+ SR 850nm 300m Optical Transceiver Module | NVIDIA Networking | Speed: 10Gb/s | In Stock | $40 |
| Arista 1G SFP SX 850nm Optical Transceiver Module | Arista | Speed: 1Gb/s | In Stock | $50 |
| Juniper 1G SFP SX 850nm Optical Transceiver Module | Juniper | Speed: 1Gb/s | In Stock | $50 |
| HPE 1G SFP SX 850nm Optical Transceiver Module | HPE | Speed: 1Gb/s | In Stock | $50 |
| Dell Technologies 1G SFP SX 850nm Optical Transceiver Module | Dell Technologies | Speed: 1Gb/s | In Stock | $50 |
| Intel 1G SFP SX 850nm Optical Transceiver Module | Intel | Speed: 1Gb/s | In Stock | $45 |
Browse all Transceivers & Cables or everything we stock from Cisco.
Specifying a system, not just the part?
Optics and cabling are part of the fabric spec on a cluster build, since both ends and the switch have to agree.