FIBLCST1: StarTech.com 1m Multimode Duplex 62.5/125 Fiber Optic Patch Cable, LC to ST, OM1, LSZH jacket
MPN: FIBLCST1|By: StarTech.com
Starting from
$21
Indicative. Final pricing is confirmed with your quote.
In Stockships worldwide
- Condition:
- New (authorized channel)
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Authorized & warrantied
Sourced through authorized distribution, with the full manufacturer warranty.
Compatibility checked
Validated against your server platform before dispatch.
Delivery & lead time
Confirmed with your quote, including expedited freight where available.
Business & public sector
POs, net terms and volume pricing for qualified organizations, government and edu.
Product overview
The StarTech.com 1m multimode duplex 62.5/125 fiber optic patch cable, LC to ST, OM1, LSZH jacket is supplied under part number FIBLCST1. Direct-attach copper is cheaper and lower latency than optics but is limited by length and by what each switch will accept. Tell us the two endpoints and we will say which of the two is right for the run.
Quote requests are answered within 48 business hours, with availability confirmed before you raise a purchase order rather than after.
Specifications
General
- Manufacturer part number
- FIBLCST1
- Product Type
- Transceivers & Cables
- Manufacturer
- StarTech.com
Technical specifications
- Cable Length
- 1m
Interfaces & connectivity
- Connector
- LC
These are the 4 facts we can state about FIBLCST1 without inferring anything. Compatibility beyond this is confirmed per platform, on request, before you order.
Where the StarTech.com FIBLCST1 is deployed
- Like-for-like replacement of FIBLCST1 in an existing system
- Replacing an optic that has started erroring
- Holding spare optics against a link-level SLA
Who this part is for
- Data centre teams cabling a new rack to an installed fabric
- Integrators supplying the passive layer with a switch order
- MSPs holding spare optics against a customer SLA
What you get ordering this from us
Ordered by part number
The order is placed against FIBLCST1, not against a description of it, so there is no room for a substitution you did not agree to.
Answered by a human
A quote comes back with the reasoning attached, including the cases where we think you should buy something else.
Compatibility checked
We confirm the part is supported on your platform before it ships, rather than leaving the check to you.
Questions buyers ask about this part
Is FIBLCST1 genuine and is the warranty intact?
Yes. Supplied new and unopened, so the manufacturer warranty and firmware update path stay supported. No grey-market stock and no refurbished units sold as new.
Will FIBLCST1 work in my server?
Tell us the switch at both ends of the link. Optics are frequently vendor-coded, so a module that is electrically correct can still refuse to come up; we confirm the coding for both ends before it ships.
Do you accept purchase orders and quote at volume?
Yes. Purchase orders are accepted from qualified organisations, net terms are available on approval, and tiered pricing applies at quantity. Tell us how many you need.
Compare other Transceivers & Cables we stock
| Model | Brand | Key spec | Availability | From |
|---|---|---|---|---|
| 10G SFP+ SR 850nm 300m Optical Transceiver Module | NVIDIA Networking | Speed: 10Gb/s | In Stock | $40 |
| Cisco 1G SFP SX 850nm Optical Transceiver Module | Cisco | Speed: 1Gb/s | In Stock | $60 |
| Arista 1G SFP SX 850nm Optical Transceiver Module | Arista | Speed: 1Gb/s | In Stock | $50 |
| Juniper 1G SFP SX 850nm Optical Transceiver Module | Juniper | Speed: 1Gb/s | In Stock | $50 |
| HPE 1G SFP SX 850nm Optical Transceiver Module | HPE | Speed: 1Gb/s | In Stock | $50 |
| Dell Technologies 1G SFP SX 850nm Optical Transceiver Module | Dell Technologies | Speed: 1Gb/s | In Stock | $50 |
Browse all Transceivers & Cables or everything we stock from StarTech.com.
Specifying a system, not just the part?
Optics and cabling are part of the fabric spec on a cluster build, since both ends and the switch have to agree.