ST16000NM002G — Seagate Exos X16 16TB 7200RPM SAS 3.5-Inch Hard Drive
MPN: ST16000NM002G|By: Seagate
Starting from
$605
Indicative — final pricing confirmed with your quote.
In Stockships worldwide
- Condition:
- New — authorized channel
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Product overview
Seagate lists ST16000NM002G as an Exos X16 16TB 7200RPM SAS 3.5-Inch hard Drive. Vendor-keyed firmware is the usual reason a mechanically identical drive is rejected by the controller, and a 16TB spare is not worth discovering that on. We check the firmware family against your controller before the drive ships.
Quotes are itemised down to the accessories, so nothing that is needed to make the part work is left off and discovered later.
Featuring
- Capacity
- 16TB
- Manufacturer
- Seagate
Interfaces / Ports
- Rotational Speed
- 7200RPM
- Drive Interface
- SAS
Physical characteristics
- Form Factor
- 3.5-Inch
- Product Type
- Server Hard Drives
- Expedited shipping options are available — rates confirmed with your quote.
- Purchase orders accepted from qualified institutions.
- Compatibility is validated against your server platform before dispatch. Send us the model and we will confirm support.
These are the 6 facts we can state about ST16000NM002G without inferring anything. Compatibility beyond this is confirmed per platform, on request, before you order.
Where the Seagate ST16000NM002G is deployed
- Sourcing ST16000NM002G against a build sheet that names it explicitly
- Growing bulk capacity in an existing disk shelf
- Rebuilding a parity group after a drive failure
Who this part is for
- MSPs holding cold spares across a fleet of identical chassis
- IT teams swapping a failed drive in a live parity group
- Procurement replacing drives out of a maintenance contract
What you get ordering this from us
Ordered by part number
ST16000NM002G is what is quoted and ST16000NM002G is what ships; where an alternate code is genuinely the same part we name it rather than swap it silently.
Compatibility checked
We confirm the part is supported on your platform before it ships, rather than leaving the check to you.
Spares held to a fleet standard
Tell us the chassis you run and we will keep the spare consistent with what is already in the shelf.
Questions buyers ask about this part
- Is ST16000NM002G genuine and is the warranty intact?
- Yes. Supplied new and unopened, so the manufacturer warranty and firmware update path stay supported. No grey-market stock and no refurbished units sold as new.
- Will ST16000NM002G work in my server?
- Send the server model or the shelf it is going into. Vendor-keyed firmware is the usual reason an identical-looking drive is rejected, so we check that alongside interface and form factor.
- Do you accept purchase orders and quote at volume?
- Yes — POs from qualified organisations, net terms on approval, and banded pricing once the quantity is worth banding. Send the number and we will price it properly.
Compare other Server Hard Drives we stock
Browse all Server Hard Drives or everything we stock from Seagate.
Specifying a system, not just the part?
Bulk capacity usually sits behind the flash tier that feeds a training cluster rather than under it.