Kioxia CM6-R 1.92TB PCI Express NVMe 4.0 x4 2.5" U.3 SFF Enterprise Solid State Drive
By: Kioxia

Starting from
$335
Indicative — final pricing confirmed with your quote.
In Stockships worldwide
- Condition:
- New — authorized channel
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Product overview
The 1.92TB is the entry capacity in Kioxia's CM6-R range, which spans 1.92TB to 15.36TB across 4 capacity points. Dual-port PCIe 4.0 NVMe for HA storage nodes needing multipath to the drive.
It attaches over PCI Express NVMe 4.0 x4 in the 2.5" U.3 SFF form factor. and is dual-ported, so both controllers in a redundant pair keep a path to the drive. Rated throughput is up to 6,800 MB/s sequential read and up to 4,200 MB/s sequential write.
At 1 DWPD this is a read-oriented part: dataset staging, model and image repositories, boot volumes and read-heavy databases. That endurance rating works out to roughly 3.5 PB written over a five-year term — worth checking against your measured write rate before you standardise on it. Media is BiCS FLASH TLC.
Featuring
- Product Line
- CM6-R
- Endurance
- 1 DWPD (read-intensive)
- Sequential Read
- Up to 6,800 MB/s
- Sequential Write
- Up to 4,200 MB/s
- Port Configuration
- Dual port
Interfaces / Ports
- Drive Interface
- NVMe
- Interface Standard
- PCI Express NVMe 4.0 x4
Physical characteristics
- Product Type
- Solid State Drive
- Drive Type
- Internal
- NAND Type
- BiCS FLASH TLC
- Drive Width
- 2.5"
- Form Factor
- U.3 SFF
Miscellaneous
- Compliance Standards
- RoHS, WEEE
- Expedited shipping options are available — rates confirmed with your quote.
- Purchase orders accepted from qualified institutions.
- Compatibility is validated against your server platform before dispatch. Send us the model and we will confirm support.
Full published specifications for the Kioxia CM6-R 1.92TB PCI Express NVMe 4.0 x4 2.5" U.3 SFF Enterprise Solid State Drive, as supplied. Confirm your backplane presents PCI Express NVMe 4.0 x4 and that the platform supports NVMe before ordering — compatibility validation against your specific server model is part of every order.
Where the CM6-R 1.92TB is deployed
- Read-heavy tiers: dataset staging, repositories and boot volumes
- Capacity expansion into free 2.5" U.3 SFF bays
- Like-for-like replacement and spares holding for deployed fleets
- New build-outs standardised on PCI Express NVMe 4.0 x4
Questions buyers ask about this part
- Will the 1.92TB CM6-R fit my server?
- This is a 2.5" U.3 SFF part on PCI Express NVMe 4.0 x4. It fits any bay wired for PCI Express NVMe 4.0 x4 with dual-port SAS routing. Send us your server model and we will confirm backplane support, firmware level and any bracket or caddy required before you order — that check is part of every order we ship.
- What is the endurance rating on the 1.92TB?
- 1 DWPD (read-intensive). Across 1.92TB of capacity that is approximately 3.5 PB of total writes over a five-year term, calculated from the drive-writes-per-day rating. Compare that against your workload's measured daily write volume: if you are writing more than 1.9TB a day to a single drive, ask us about the mixed-use alternatives instead.
- Should I take the 1.92TB or the 3.84TB?
- They are the same drive with different capacity: identical PCI Express NVMe 4.0 x4, 2.5" U.3 SFF and endurance rating. The 3.84TB gives you 2.0x the capacity per bay. Where bays are the constraint — a full backplane, or a rack you cannot grow — the larger capacity is usually cheaper per usable terabyte once you count the chassis it saves. Ask us for both on one quote and compare.
- How fast is the 1.92TB CM6-R?
- Up to 6,800 MB/s sequential read and up to 4,200 MB/s sequential write, which is what PCI Express NVMe 4.0 x4 allows. Sustained figures under a real mixed workload land lower than the sequential headline — tell us your access pattern and queue depth and we will tell you what to expect rather than quoting the datasheet at you.
- Is this Kioxia part genuine, and is the warranty intact?
- Yes. We supply through authorized distribution only, so the part carries the full Kioxia manufacturer warranty and its firmware update path stays supported. No grey-market stock, no re-labelled drives, no voided warranties.
- Do you offer volume pricing and accept purchase orders?
- The listed price is per unit and indicative; tiered pricing applies at quantity. We accept purchase orders from qualified businesses, government and defence agencies, and educational institutions, with net terms and consolidated invoicing available. Email the quantity you need and we will come back within 48 business hours.
Other capacities in the Kioxia CM6-R range
| Model | Part number | Availability | From |
|---|---|---|---|
| Kioxia CM6-R 3.84TB PCI Express NVMe 4.0 x4 2.5" U.3 SFF Enterprise Solid State Drive | — | In Stock | $645 |
| Kioxia CM6-R 7.68TB PCI Express NVMe 4.0 x4 2.5" U.3 SFF Enterprise Solid State Drive | — | In Stock | $1,250 |
| Kioxia CM6-R 15.36TB PCI Express NVMe 4.0 x4 2.5" U.3 SFF Enterprise Solid State Drive | — | On Backorder | $2,455 |
Compare other Enterprise SSD we stock
Browse all Enterprise SSD or everything we stock from Kioxia.
