JNP10K-PWR-DC2: Juniper 5000-Watts 12V DC Redundant Power Supply
MPN: JNP10K-PWR-DC2|By: Juniper
Price
Quoted on request
Current pricing within 48 business hours.
In Stockships worldwide
- Condition:
- New (authorized channel)
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Authorized & warrantied
Sourced through authorized distribution, with the full manufacturer warranty.
Compatibility checked
Validated against your server platform before dispatch.
Delivery & lead time
Confirmed with your quote, including expedited freight where available.
Business & public sector
POs, net terms and volume pricing for qualified organizations, government and edu.
Product overview
JNP10K-PWR-DC2 is a Juniper 5000-Watts 12V DC redundant power Supply. The input side has to suit the rack: voltage, connector and whether the circuit can carry another unit at all. This is a 12V supply. Tell us what the PDU presents and we will confirm the variant.
We return an itemised quote within 48 business hours, and we say plainly when a part is constrained rather than quoting a date we cannot hold.
Specifications
General
- Manufacturer part number
- JNP10K-PWR-DC2
- Product Type
- Power Supplies
- Manufacturer
- Juniper
Technical specifications
- Power Rating
- 5000W
- Input Voltage
- 12V
- Redundancy
- Redundant
The table below is what the power supply is documented as, not what we have inferred from the part number. If the figure you need is missing, ask and we will source it from the manufacturer.
Where the Juniper JNP10K-PWR-DC2 is deployed
- Swapping out a failed power supply for JNP10K-PWR-DC2 under change control
- Holding a matched spare for a production chassis
- Re-rating power after adding accelerators or drives
Who this part is for
- MSPs holding a matched PSU spare per chassis family
- Teams re-rating power after adding GPUs or a full drive complement
- Procurement sourcing a like-for-like supply outside a maintenance contract
What you get ordering this from us
Ordered by part number
Quoted and supplied against JNP10K-PWR-DC2 specifically, so what arrives is what your build sheet asks for.
Compatibility checked
We confirm the part is supported on your platform before it ships, rather than leaving the check to you.
Volume pricing
The listed price is per unit; tiered pricing applies at quantity and purchase orders are accepted.
Questions buyers ask about this part
Is JNP10K-PWR-DC2 genuine and is the warranty intact?
Yes. It ships new in Juniper packaging, which is what keeps the warranty and the firmware entitlement valid. Anything we cannot supply that way we tell you about before you order.
Will JNP10K-PWR-DC2 work in my server?
Send the server model and the part number of the supply already fitted. In a redundant pair both units have to match on wattage and efficiency grade, or the chassis alerts on every boot.
Do you accept purchase orders and quote at volume?
Yes, POs from qualified organisations, net terms on approval, and banded pricing once the quantity is worth banding. Send the number and we will price it properly.
Compare other Power Supplies we stock
| Model | Brand | Key spec | Availability | From |
|---|---|---|---|---|
| Dell 495W Hot-Plug Redundant Power Supply for PowerEdge Rack Servers | Dell Technologies | Efficiency: 80 PLUS Platinum | In Stock | $175 |
| HPE 500W Flex Slot Platinum Hot-Plug Power Supply for ProLiant Servers | HPE | Efficiency: 80 PLUS Platinum | In Stock | $190 |
| Supermicro 1200W Redundant Titanium Hot-Swap Power Supply Module | Supermicro | Efficiency: 80 PLUS Titanium | In Stock | $415 |
| Lenovo 750W 80 PLUS Platinum Hot-Plug Server Power Supply | Lenovo | Wattage: 750W | In Stock | $165 |
| IBM 550W 80 PLUS Platinum Hot-Plug Server Power Supply | IBM | Wattage: 550W | In Stock | $100 |
| HP 460W 80 PLUS Gold Hot-Plug Server Power Supply | HP | Wattage: 460W | In Stock | $60 |
Browse all Power Supplies or everything we stock from Juniper.
Specifying a system, not just the part?
An accelerated node draws far more than a general-purpose server, so power is sized with the build rather than assumed from the chassis.