Skip to content

300,000+ products available to order|AI infrastructure + enterprise IT hardware, sourced through authorized channels.

HPE 7.68TB SATA 6Gb/s Read Intensive SFF Smart Carrier ProLiant Solid State Drive

By: HPE

HPE 7.68TB SATA 6Gb/s Read Intensive SFF Smart Carrier ProLiant Solid State Drive

Starting from

$1,210

Indicative — final pricing confirmed with your quote.

On Backorderships worldwide

Condition:
New — authorized channel
Warranty:
Full manufacturer warranty

Get pricing and availability

Email + WhatsApp so we always reach you.

Prefer your own inbox? Email us about this part

Have questions?

Talk to a hardware specialist.

WhatsAppEmail

Bulk order? Request volume pricing

Product overview

The 7.68TB is the largest capacity in HPE's ProLiant SATA Read Intensive range, which spans 480GB to 7.68TB across 5 capacity points. HPE-firmware SATA flash on the Smart Carrier — Gen9 through Gen11 ProLiant bays.

It attaches over 6Gb/s SATA in the 2.5" SFF Smart Carrier form factor. It ships on the HPE Smart Carrier (SC), so it seats in the bay without sourcing a tray separately. Rated throughput is up to 560 MB/s sequential read and up to 530 MB/s sequential write.

At 1 DWPD this is a read-oriented part: dataset staging, model and image repositories, boot volumes and read-heavy databases. That endurance rating works out to roughly 14 PB written over a five-year term — worth checking against your measured write rate before you standardise on it. Media is 3D TLC.

Featuring

Product Line
HPE SSD
Product Series
SATA Read Intensive
Endurance
1 DWPD (read-intensive)
Sequential Read
Up to 560 MB/s
Sequential Write
Up to 530 MB/s
Carrier
HPE Smart Carrier (SC) included
Firmware
HPE-qualified

Interfaces / Ports

Drive Interface
SATA
Interface Standard
6Gb/s SATA

Physical characteristics

Product Type
Solid State Drive
Drive Type
Internal
NAND Type
3D TLC
Drive Width
2.5"
Form Factor
SFF Smart Carrier

Miscellaneous

Compliance Standards
RoHS, WEEE
  • Expedited shipping options are available — rates confirmed with your quote.
  • Purchase orders accepted from qualified institutions.
  • Compatibility is validated against your server platform before dispatch. Send us the model and we will confirm support.

Full published specifications for the HPE 7.68TB SATA 6Gb/s Read Intensive SFF Smart Carrier ProLiant Solid State Drive, as supplied. Confirm your backplane presents 6Gb/s SATA and that the platform supports SATA before ordering — compatibility validation against your specific server model is part of every order.

Where the ProLiant SATA Read Intensive 7.68TB is deployed

  • Read-heavy tiers: dataset staging, repositories and boot volumes
  • Capacity expansion into free 2.5" SFF Smart Carrier bays
  • Like-for-like replacement and spares holding for deployed fleets
  • New build-outs standardised on 6Gb/s SATA

Questions buyers ask about this part

Will the 7.68TB ProLiant SATA Read Intensive fit my server?
This is a 2.5" SFF Smart Carrier part on 6Gb/s SATA. It fits any bay wired for 6Gb/s SATA, and the carrier is included so no separate tray is needed. Send us your server model and we will confirm backplane support, firmware level and any bracket or caddy required before you order — that check is part of every order we ship.
What is the endurance rating on the 7.68TB?
1 DWPD (read-intensive). Across 7.68TB of capacity that is approximately 14 PB of total writes over a five-year term, calculated from the drive-writes-per-day rating. Compare that against your workload's measured daily write volume: if you are writing more than 7.7TB a day to a single drive, ask us about the mixed-use alternatives instead.
Should I take the 7.68TB or the 3.84TB?
They are the same drive with different capacity: identical 6Gb/s SATA, 2.5" SFF Smart Carrier and endurance rating. The 3.84TB gives you less capacity per bay at a lower unit cost. Where bays are the constraint — a full backplane, or a rack you cannot grow — the larger capacity is usually cheaper per usable terabyte once you count the chassis it saves. Ask us for both on one quote and compare.
How fast is the 7.68TB ProLiant SATA Read Intensive?
Up to 560 MB/s sequential read and up to 530 MB/s sequential write, which is what 6Gb/s SATA allows. Sustained figures under a real mixed workload land lower than the sequential headline — tell us your access pattern and queue depth and we will tell you what to expect rather than quoting the datasheet at you.
Is this HPE part genuine, and is the warranty intact?
Yes. We supply through authorized distribution only, so the part carries the full HPE manufacturer warranty and its firmware update path stays supported. No grey-market stock, no re-labelled drives, no voided warranties.
Do you offer volume pricing and accept purchase orders?
The listed price is per unit and indicative; tiered pricing applies at quantity. We accept purchase orders from qualified businesses, government and defence agencies, and educational institutions, with net terms and consolidated invoicing available. Email the quantity you need and we will come back within 48 business hours.

Other capacities in the HPE ProLiant SATA Read Intensive range

Compare other Enterprise SSD we stock

Browse all Enterprise SSD or everything we stock from HPE.