Dell 1.6TB PCIe 4.0 x4 NVMe U.2 Mixed Use 2.5-inch Hot-Plug PowerEdge Solid State Drive
By: Dell Technologies

Starting from
$460
Indicative — final pricing confirmed with your quote.
In Stockships worldwide
- Condition:
- New — authorized channel
- Warranty:
- Full manufacturer warranty
Prefer your own inbox? Email us about this part
Bulk order? Request volume pricing
Product overview
The 1.6TB is the entry capacity in Dell Technologies's PowerEdge NVMe Mixed Use range, which spans 1.6TB to 6.4TB across 3 capacity points. Dell-qualified mixed-use NVMe for PowerEdge write-heavy volumes, carrier fitted.
It attaches over PCI Express NVMe 4.0 x4 in the 2.5" U.2 SFF hot-plug form factor. It ships on the Dell hot-plug carrier, so it seats in the bay without sourcing a tray separately. Rated throughput is up to 6,800 MB/s sequential read and up to 4,200 MB/s sequential write.
At 3 DWPD this is a write-endurance part: logging, journals, checkpoint targets and transactional databases rather than bulk read-mostly capacity. That endurance rating works out to roughly 8.8 PB written over a five-year term — worth checking against your measured write rate before you standardise on it. Media is 3D TLC.
Featuring
- Product Line
- PowerEdge NVMe Mixed Use
- Endurance
- 3 DWPD (mixed use)
- Sequential Read
- Up to 6,800 MB/s
- Sequential Write
- Up to 4,200 MB/s
- Carrier
- Dell hot-plug carrier included
- Platform Qualification
- Dell PowerEdge 15G – 16G
Interfaces / Ports
- Drive Interface
- NVMe
- Interface Standard
- PCI Express NVMe 4.0 x4
Physical characteristics
- Product Type
- Solid State Drive
- Drive Type
- Internal
- NAND Type
- 3D TLC
- Drive Width
- 2.5"
- Form Factor
- U.2 SFF hot-plug
Miscellaneous
- Compliance Standards
- RoHS, WEEE
- Expedited shipping options are available — rates confirmed with your quote.
- Purchase orders accepted from qualified institutions.
- Compatibility is validated against your server platform before dispatch. Send us the model and we will confirm support.
Full published specifications for the Dell 1.6TB PCIe 4.0 x4 NVMe U.2 Mixed Use 2.5-inch Hot-Plug PowerEdge Solid State Drive, as supplied. Confirm your backplane presents PCI Express NVMe 4.0 x4 and that the platform supports NVMe before ordering — compatibility validation against your specific server model is part of every order.
Where the PowerEdge NVMe Mixed Use 1.6TB is deployed
- Write-heavy tiers: logging, journals and checkpoint targets
- Capacity expansion into free 2.5" U.2 SFF hot-plug bays
- Like-for-like replacement and spares holding for deployed fleets
- New build-outs standardised on PCI Express NVMe 4.0 x4
Questions buyers ask about this part
- Will the 1.6TB PowerEdge NVMe Mixed Use fit my server?
- This is a 2.5" U.2 SFF hot-plug part on PCI Express NVMe 4.0 x4. It fits any bay wired for PCI Express NVMe 4.0 x4, and the carrier is included so no separate tray is needed. Send us your server model and we will confirm backplane support, firmware level and any bracket or caddy required before you order — that check is part of every order we ship.
- What is the endurance rating on the 1.6TB?
- 3 DWPD (mixed use). Across 1.6TB of capacity that is approximately 8.8 PB of total writes over a five-year term, calculated from the drive-writes-per-day rating. Compare that against your workload's measured daily write volume: if you are writing more than 4.8TB a day to a single drive, ask us about the mixed-use alternatives instead.
- Should I take the 1.6TB or the 3.2TB?
- They are the same drive with different capacity: identical PCI Express NVMe 4.0 x4, 2.5" U.2 SFF hot-plug and endurance rating. The 3.2TB gives you 2.0x the capacity per bay. Where bays are the constraint — a full backplane, or a rack you cannot grow — the larger capacity is usually cheaper per usable terabyte once you count the chassis it saves. Ask us for both on one quote and compare.
- How fast is the 1.6TB PowerEdge NVMe Mixed Use?
- Up to 6,800 MB/s sequential read and up to 4,200 MB/s sequential write, which is what PCI Express NVMe 4.0 x4 allows. Sustained figures under a real mixed workload land lower than the sequential headline — tell us your access pattern and queue depth and we will tell you what to expect rather than quoting the datasheet at you.
- Is this Dell Technologies part genuine, and is the warranty intact?
- Yes. We supply through authorized distribution only, so the part carries the full Dell Technologies manufacturer warranty and its firmware update path stays supported. No grey-market stock, no re-labelled drives, no voided warranties.
- Do you offer volume pricing and accept purchase orders?
- The listed price is per unit and indicative; tiered pricing applies at quantity. We accept purchase orders from qualified businesses, government and defence agencies, and educational institutions, with net terms and consolidated invoicing available. Email the quantity you need and we will come back within 48 business hours.
Other capacities in the Dell Technologies PowerEdge NVMe Mixed Use range
| Model | Part number | Availability | From |
|---|---|---|---|
| Dell 3.2TB PCIe 4.0 x4 NVMe U.2 Mixed Use 2.5-inch Hot-Plug PowerEdge Solid State Drive | — | In Stock | $895 |
| Dell 6.4TB PCIe 4.0 x4 NVMe U.2 Mixed Use 2.5-inch Hot-Plug PowerEdge Solid State Drive | — | In Stock | $1,755 |
Compare other Enterprise SSD we stock
Browse all Enterprise SSD or everything we stock from Dell Technologies.
